H50C – Air Recycling Box – Carbon Filter Fan
Description
Fan that helps extract harmful and toxic vapours from cabinets.
Where a cabinet cannot be connected to an extract-air system, a carbon filter fan is a good alternative that does not require a ventilation system.
It cleans the air and captures harmful substances, allowing the filtered air to be discharged directly back into the room.
We also offer a connection kit for easy connection to all our cabinets with a Ø100 mm connection.
Certification/classification:
– Testade och följer NF X 15-211
ARTICLE NO.: H50C – “Air Recycling Box” carbon filter fan, excluding filter
H310 x W505 x D485 mm.
NOISE LEVEL: 43 dB
FREE-BLOWING AIRFLOW: 86 M3/H
TILL & FRÅNLUFT: Ø 100mm
Cleans the air so that filtered air can be discharged directly back into the room.
For installation on top of the cabinet. Maximum 2 cabinets per fan, and only when positioned side by side so that the ducts can be connected.
KRC connection kit is recommended for easier installation (behövs ej för F30KEM4 & F30KEM5).
Accessories
ARTICLE NO.: KRC – Connection Kit
For easy connection to cabinets and containers.
OTHER: Includes 1x Ø100 mm connection, 2x hose clamps and 1x 1 m ventilation duct.
Carbon Filters for H50C
ARTICLE NO.: H50-ORG50
For flammable and toxic substances
ARTICLE NO.: H50-CORG51
For corrosive substances
ARTICLE NO.: H50-FOR50
For substances that emit formaldehyde vapours
Carbon Filters for Older Models
Supplied up to and including 2020-12-31
ARTICLE NO.: CDFORG – Carbon Filters for CDF-A
The carbon filter cleans the air and captures harmful substances. For flammable and toxic substances.
The filter must be replaced at least once a year.
ARTICLE NO.: CDFCORG – Carbon Filters for CDF-P
The carbon filter cleans the air and captures harmful substances. For corrosive substances.
The filter must be replaced at least once a year.
