Collection Page – Fans and Cabinet Ventilation
Description
Fans that help extract harmful and toxic vapours from cabinets.
We offer fans for flammable, toxic and corrosive substances, as well as for flammable gases.
A carbon filter fan is a good alternative that does not require a ventilation system.
It cleans the air and captures harmful substances, allowing the filtered air to be discharged directly back into the room.
We also offer a connection kit for easy connection to all our cabinets and containers.
Certification/classification:
ARTICLE NO.: H50C – “Air Recycling Box” carbon filter fan, excluding filter
H310 x W505 x D485 mm.
NOISE LEVEL: 43 dB
FREE-BLOWING AIRFLOW: 86 M3/H
TILL & FRÅNLUFT: Ø 100mm
Cleans the air so that filtered air can be discharged directly back into the room.
For installation on top of the cabinet. Maximum 2 cabinets per fan, and only when positioned side by side so that the ducts can be connected.
KRC connection kit is recommended for easier installation (behövs ej för F30KEM4 & F30KEM5).
ARTICLE NO.: CDV-A – Ventilation Box
H235 x W260 x D245 mm, connection diameter: Ø 100 mm
NOISE LEVEL: 57 dB
ENCLOSURE RATING: IP44
AIRFLOW: 240 M3/H
Ventilation box with electric fan for connection to a ventilation system.
KRC connection kit or equivalent is recommended for easier installation.
ARTICLE NO.: Matex100 – EX fan for cabinets with flammable gases
H400 x W230 x D377 mm, connection diameter Ø 75 mm
Includes Ø100/75 mm diameter adaptor
NOISE LEVEL: 65 dB
ENCLOSURE RATING: IP55
FREE-BLOWING AIRFLOW: 100 M3/H
TEMPERATURE CLASS: Class T4 (135°C).
For use in environments where explosive atmospheres may occur.
KRC connection kit is recommended for easier installation.
ARTICLE NO.: H40+ – “Air Recycling Box” carbon filter fan, excluding filter
H630 x W270 x D460 mm
NOISE LEVEL: 43 dB
FREE-BLOWING AIRFLOW: 86 M3/H
TILL & FRÅNLUFT: Ø 100 mm
Cleans the air so that filtered air can be discharged directly back into the room.
For installation on the side or rear of the cabinet.
KRC connection kit is recommended for easier installation.
Accessories
ARTICLE NO.: KRC – Connection Kit
For easy connection to cabinets and containers.
OTHER: Includes 1x Ø100 mm connection, 2x hose clamps and 1x 1 m ventilation duct.
Carbon Filters for H50C
ARTICLE NO.: H50-ORG50
For flammable and toxic substances
ARTICLE NO.: H50-CORG51
For corrosive substances
ARTICLE NO.: H50-FOR50
For substances that emit formaldehyde vapours
Carbon Filters for H40+
ARTICLE NO.: H40-ORGFC
For flammable and toxic substances
ARTICLE NO.: H40-CORGFC
For corrosive substances
ARTICLE NO.: H40-FORFC
For substances that emit formaldehyde vapours
Carbon Filters for Older Models
Supplied up to and including 2020-12-31
ARTICLE NO.: CDFORG – Carbon Filters for CDF-A
The carbon filter cleans the air and captures harmful substances. For flammable and toxic substances.
The filter must be replaced at least once a year.
ARTICLE NO.: CDFCORG – Carbon Filters for CDF-P
The carbon filter cleans the air and captures harmful substances. For corrosive substances.
The filter must be replaced at least once a year.
