Gas Cabinet – EI30GAS1 – 77 cm Deep

Description

LPG cabinets and gas cabinets – fire rating EI30.
For storage of flammable gases. The cabinet has been fire tested by SP in accordance with test method NT FIRE 017 and withstood 30 minutes.

JiWa EI30 fire-separating gas and LPG cabinets are equipped with ventilation connections that vent directly through an external wall without mechanical ventilation. Two pipe connections (ILÖ 80) are located on the rear of the cabinet, one at the top and one at the bottom. The shelves have a load capacity of 70 kg with an evenly distributed load.

For indoor storage of flammable gas, EI30 fire separation is required when the total stored volume exceeds 0 litres in premises accessible to the public and 60 litres in premises not accessible to the public (MSBFS 2020:1). This fire-rated gas cabinet meets this requirement.

*Premises accessible to the public means premises to which the general public has access.

Gas cabinets with mechanical ventilation that comply with the European laboratory standard EN 14470-2 can be found here.
For an overview of our gas and LPG cabinets, see the gas storage overview.

SP (Technical Research Institute of Sweden) tests:
– Fire tested in accordance with NT Fire 017 – 30 minutes
– Workmanship in accordance with SS83 90 30, edition 3
– Meets Möbelfakta’s extra stringent requirements for surface durability

ARTICLE NO.: EI30 GAS1
EXTERNAL DIMENSIONS: H853 x W925 x D770 mm.
INTERNAL DIMENSIONS: H710 x W790 x D600 mm.
CLEAR OPENING: H628 x W700 mm.
WEIGHT: 180 kg
DRAWING: 2D.pdf 2D.dwg 3D.dwg

Accessories

ARTICLE NO.: EI30L
Lock incl. 2 keys, ASSA latch lock 565, ASSA cylinder 701

ARTICLE NO.: EI30H12
Adjustable shelf for EI30GAS1 & 2

ARTICLE NO.: EI30UH12
Pull-out shelf for EI30GAS1 & 2

ARTICLE NO.: EI30VAGN12
Trolley incl. ramp for EI30GAS1 & 2

ISO 9001 Certifikat

Download product data sheet – EI30 Gas Cabinet

ISO 9001 Certifikat

Download installation and maintenance instructions – EI30 Fire-separating Gas and LPG Cabinets

Similar products